SYSTEM
As an important parallel thread connection technology, the upset forging parallel thread connection technology posses following advantage:
1.Wide working range: adaptable for Φ12mm-Φ40mm same diameter, different diameter,
bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 or ASTM A706, ACI318,BS 8110, DIN 1045, standard.
2.High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of connection point =1.1 times of connected bar).It can satisfy the requirements stipulated in the Chinese standard JGJ107-2010,JG171-2005.
3.No reduction of the bar cross section area.
4.Allows full ductile elongation of bars.
5.Easy installation, no torque wrench required.
6.One standard coupler for all splicing requirements (Standard/Position).
7.Manufactured under strict quality assurance plan, ISO 9001 and ASME certified.
8.Full traceability of material origin and production batch.
9.Type 2 coupler suitable for seismic areas.
10.Tested under reverse-cyclic conditions.
11.Solves bar congestion problems.
12.No staggering of spliced bars required.
2. Technical data
Steel bar Diameter (MM) |
Out Dia.of Coupler (MM) |
Inner Dia.of Coupler (MM) |
Length of Coupler (MM) |
Size of Thread (MM) |
12 | 20 | 11.9 | 30 | M14*2 |
14 | 22 | 13.9 | 34 | M16*2 |
16 | 26 | 17.4 | 40 | M20*2.5 |
18 | 29 | 19.4 | 44 | M22*2.5 |
20 | 32 | 20.9 | 48 | M24*3 |
22 | 36 | 23.9 | 52 | M27*3 |
25 | 40 | 26.3 | 60 | M30*3.5 |
28 | 44.5 | 29.3 | 66 | M33*3.5 |
32 | 50 | 31.8 | 72 | M36*4.0 |
36 | 56 | 34.8 | 80 | M39*4.0 |
40 | 62 | 40.3 | 90 | M45*4.0 |
According to Chinese standard GB 1499.2-2007,
For rebar HRB400:Tensile strength≥540Mpa,Yeild strength≥400Mpa;
For rebar HRB500:Tensile strength≥630Mpa,Yeild strength≥500Mpa.
The upset forging parallel thread connection technology can not only be used for the connection of HRB400 rebar, but also for other rebar, such as HRB500, Gr.60, Gr.75, Gr.80, B500B,B500C, etc. Those of tensile strength is more than 700Mpa and so on.
3. Working principle
First, we use GD-150 to forging the end of rebar.
Second, we use the GZL-45 to threading the end of rebar.
Third, we use the coupler to link the two ends of rebar.
4. What makes us successful
A. Shorten your engineering period -- the two rebars can be connected within 35 seconds;
B. Catch the highest quality -- 100% broken rebars, no safty worrying, can past any safty quality test;
C. Save rebars -- give up weld and colligation rather than our connecting methods,
can save many rebars materials.
Application in Construction Project
Bridge Project | Hangzhou Bay Crossing Sea Bridge, Jiangyin Yangzi River Bridge, Jiangsu Runyang Bridge |
Commercial Building Project |
Burj Khalifa Tower, Oriental Pearl tower, Saraya Tower, Jinmao Tower |
Public Project | Beijing Capital Airport, Qinshan Nuclear Power Plant, Gazi-Barotha Hydropower Station In Pakistan, North Jeddah Water Pump Station, Dubai Metro, Suzhou Gymnasium |
5.Why choose JBCZ
1, High strength: the strength reach Grade I , stronger than the
reinforcement bar and guarantees bar break under tensile stress
(tensile strength of connection point =1.1 times of connected bar).
It can satisfy the requirements stipulated in the Chinese standard
JGJ107-2003,JG171-2005.
2 ,Wide working range: adaptable for Φ12mm-Φ50mm same diameter, different diameter, bending, new and old,
advance covered up rebar of GB 1499 , BS 4449 , ASTM A615 or
ASTM A706 standard.
3,High efficiency: upset forging and threading one joint only needs
no more than one minute, and handy operation
and quick link.
4,Environmental protection and economy profit: no
environment pollution, can work all day, not affected by
weather, economize energy source and bar material.
6. One of JBCZ Clients
JBCZ products have been to 30 countries over the world :
Saudi Arabia, Mexico, Poland,Colombia, Pakistan, Qatar, UAE , Japan ,France ,New Zealand ,India , Ukraine, Sudan, Brazl, Lebanon ,South Korea Thailand , Argentina, Kuwait,Taiwan,Russia, Dominica , Turkey, Malaysia ,Jamaica,Ethiopia ,Zambia,Philippines, China
RFQ
A: We are factory. We are the FIRST manufacturer of rebar coupler since 1987.
A: Generally it is within 5-10 days if the goods are in stock. or it is within 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge , but clients do not need to pay the cost of freight.
A: Payment 100% in advance. Can communicate.
B:All the payment go through Aliababa Onetouch or Alibaba assurance payment
How to find good suppliers in China | |
A good supplier should be at least 5 years history and have export /import business at least 3 years. |
JBCZ Company has been a manufacturer of rebar coupler and connecting machine which used to link two steel bar quickly in construction projects since 1987. We have been in this field for 29 years. |
An excellent supplier must have professional equipments to ensure the highest products quality. |
JBCZ Company has processional CNC production line. |
Are samples available? If they don't have samples readily available, they probably don't deal in your product on a regular basis. |
Samples are available globally in JBCZ Company . |
Make sure the sales team can communicate in English and understand of your basis requests ? If you ask for information on a red cup and get sent a sample of a blue , you will need to change another one ! |
JBCZ Company international department colleagues have at least CET 6 English Level. |
Confirm the actual production location and ask for certifications of the factory. |
JBCZ Company has the certification of the JGJ107,BSB110,NF25-20-1, UK STANDARD, American ISO, ACI 318 , BS4449, DIN1045 etc. |
Does this company have some famous projects ? |
JBCZ products have been to 26 countries over the world ,such as Saudi Arabia, Mexico, India, Poland, Sudan, Columbia, Pakistan, Qatar ,etc. Of course , we also have huge number of projects, such as Jeddah Water Pump Station, Dubai Metro, Qinshan Nuclear Power Plant, Qatar express way , Shanghai Oriental Pearl TV Tower ,etc. |